DriveMaster 8 Professional SATA

DriveMaster 8 Professional SATA Interface

Supports standard & user-defined ATA commands
Supports major ATA feature sets, including 48bit Address, NCQ, SECURITY, SMART, DCO, Long Logic Sector, GPL, HPA, SCT, Streaming, CFA
Zoned-device ATA Command Set (ZAC)
Accessible Max Address Configuration
Set Sector Configuration Ext
Zero Ext
DSM XL
DSM Function in DSM and DSM XL
Sanitize AntiFreeze Lock
Zoned No Reset in Sanitize
Multiple Logical Sectors of Pattern and Foreground in SCT Write Same
Rebuild Assist Feature Set
NCQ Encapsulation for ATA commands
Hybrid Info Feature Set
User friendly Command Control Panel for SATA PHY, ATA commands
Complete support of Advanced Host Controller Interface (AHCI)
Hundreds of scripts for ATA protocol, performance, regression, and reliability tests
Readable descriptions of device identification info, SMART info, GPL Log info
Legacy CHS mode test
Benchmark simulation test
Power management test
Power interrupt integrity test
Power cycling test
Device ready timing measurement
Power state (S3/S4/S5) resume timing measurement

Windows 10 recommended. Windows 7 and above, Windows Server 2008, Windows Server 2012, Windows Server 2016
The above operating systems with x64 support.

Generic AHCI platform: AMD, Intel, JMicron, NVIDIA, VIA, etc
Generic IDE/PATA
Intel ICHx (IDE, AHCI and RAID Mode)
Marvell 6081 PCI-X SATA II / 61xx PCI-E series
Silicon Image Sil3124 PCI-X / Sil3132 / 3531 PCI-E
Any HBA that complies with the vendor specs of the above Marvell and Silicon Image chipsets
VIA 5324